Clamp Connection DIN32676
Standard connection to DIN32676 for hygienic pipelines carrying gases and liquids. Ferrules, gasket and clamp form a joint that can be opened and reassembled for maintenance, inspection and cleaning.
DIN32676clamp connection to standard
40bar up to DIN40, ISO25 and OD 1½"
1.4435(316L), product contact standard
Ra < 0.6µm, product contact electropolished
Features
Three parts, one joint that opens.
Two matching ferrules, a gasket between them and a clamp around them. Blind caps close unused connection points, the front sight glass makes the medium visible at the connection.
- Hygienic clamp connection for gases and liquids
- Ferrules in DIN, ISO and OD dimensions, orbital weldable
- Several clamp versions
- Product-contact surfaces electropolished
- Product-contact parts marked with article number, material and heat number
- Gaskets FDA conform, USP Class VI, TSE-free
- Certificate to EN10204 3.1 available
Components
Ferrule, clamp, gasket. And what goes with them.
TC ferrules
- DIN dimensions
- ISO dimensions
- OD dimensions
- liquitec standard lengths
- Ferrules to ISO2852 on request
- SMS pipe dimensions on request
TC clamps
- With wing nut, standard version
- With wing nut, light version
- With hexagon nut
- Safety clamp with reinforced bolt and safety wing nut
- High pressure clamp for higher pressure requirements
Gaskets and closures
- TC gaskets
- TC blind cap for unused or temporary connection points
- TC blind cap with handle for easier opening and closing
- TC front sight glass for visual inspection of the medium at the connection
Pressure ratings
The larger the size, the lower the pressure.
Pressure ratings by nominal size range, listed per pipe standard.
| Pressure up tobar | DIN | ISO | OD |
|---|---|---|---|
| 40 | DIN04–DIN40 | ISO06–ISO25 | OD ¼"–OD 1½" |
| 25 | DIN50–DIN65 | ISO32–ISO50 | OD 2"–OD 2½" |
| 16 | DIN80–DIN100 | ISO65–ISO100 | OD 3"–OD 6" |
Technical data
Materials, surfaces, documentation.
- Nominal sizes
- DIN04–DIN200, ISO06–ISO200, OD ¼"–OD 6"
- Pipe dimensions
- DIN11866 series A, B and C
- Product contact
- 1.4435 (316L)
- Special materials
- 2.4602, titanium, 1.4539, 1.4404 and others on request
- Product-contact surface
- Electropolished Ra < 0.6 µm, Ra < 0.4 µm on request
- Media
- Gases and liquids
- Marking
- Article number, material, heat number
- Certificates
- EN10204 3.1
- Gaskets
- FDA conform, USP Class VI, TSE-free
Gaskets
Gasket materials and temperature ranges.
- EPDM
- −40 to +150 °C
- FEP / silicone
- −60 to +200 °C
- FKM
- −20 to +200 °C
- FFKM
- −10 to +260 °C
Contact
Enquiry
For a quotation we need component, pipe standard, nominal size, material and surface finish, as well as ferrule length, gasket material and clamp type.
Prefer to write directly?