bio-plus® sterile connectionStrainer
Fits the
Strainers and Orifices
Conical strainer and orifice sit directly in the sealing seat of the pipe connection — for the
400µm mesh width as standard
30…2000µm mesh width on request
16bar operating pressure, up to DIN40
Ra < 0.6µm, product contact electropolished
Overview
Holding back solids. In the sealing seat.
Strainer and orifice are placed between the two halves of a pipe connection. Sealing is by an O-ring with groove, a clamp gasket with groove or a flat seal with groove, depending on the connection. No separate housing is needed.
- For gases and liquids
- Suitable for the
bio-plus® sterile connection, DIN11864, DIN32676 and EN1092 - Conical strainer, standard mesh width 400 µm, 30 to 2000 µm on request
- Flat strainer with 400 or 1000 µm
- Orifice without bore or with 2 mm bore
- Carrier ring 1.4435 (316L), mesh 1.4404 (316L)
- Product-contact surfaces electropolished, Ra < 0.6 µm
- Gaskets FDA conform, USP Class VI, TSE-free
- Special designs on request
Versions
Strainer or orifice. In every connection.
bio-plus® sterile connectionOrifice
Without a bore it closes the line, with a central 2 mm bore it restricts the flow. Same sealing seat as the strainer.
DIN11864 aseptic connectionStrainer
Own series for the aseptic screw union, flange and clamp connection to
DIN11864 aseptic connectionOrifice
Without bore or with a central 2 mm bore, suitable for all three designs to DIN11864.
the combinationSight Glass with Strainer
Strainer and line sight glass in one connection: you see what the strainer holds back and spot the fouling before the pressure drop rises.
DIN32676 and EN1092Clamp and Flange
Strainer and orifice of the
Technical data
Sizes, materials, gaskets.
- Nominal sizes
- DIN10 to DIN100, ISO08 to ISO100, OD ½" to OD 4"; strainer for EN1092 ISO10 to ISO200
- Pipe dimensions
- DIN11866 series A (DIN), B (ISO) and C (OD)
- Operating pressure
- 16 bar up to DIN40, ISO40 and OD 2"
- Strainer mesh width
- Standard 400 µm; 200, 630, 800, 1000, 1600 and 2000 µm acc. ordering key; 30 to 2000 µm on request; flat strainer 400 or 1000 µm
- Orifice bore
- Standard without bore; 2 mm bore central; other diameters and eccentric bores on request
- Product-contact materials
- Carrier ring 1.4435 (316L), mesh 1.4404 (316L); special materials such as 2.4602, titanium or 1.4539
- Gaskets
- O-ring with groove, clamp gasket with groove or flat seal with groove, each in EPDM, VMQ (silicone), FKM or FFKM; to be ordered separately
- Temperature by gasket
- EPDM −40 to +150 °C, briefly 160 °C; VMQ −50 to +200 °C, briefly 230 °C; FFKM −15 to +260 °C
- Product-contact surface
- Electropolished Ra < 0.6 µm, other surfaces on request
- Pressure loss
- Depending on mesh width and contamination; pressure loss diagrams on request
- Cleaning
- Do not backflush conical strainers: the mesh can be mechanically damaged
- Certificates
- Inspection certificate 3.1 to EN10204 for product-contact parts; product-contact gaskets FDA conform, USP Class VI, TSE-free
- Traceability
- Via the order number
Ordering key
Six positions, one part.
Example: E3.N10.400.35 — strainer, ISO DN10, mesh width 400 µm, carrier ring 1.4435 (316L) with mesh 1.4404, for
Part and size
- E3 strainer
- G2 orifice
- 01 O-ring or clamp gasket with groove
- Pipe standard DIN, ISO or OD
- Nominal size acc. table of pipe connections
Strainer, orifice, connection
- Mesh width 200 to 2000 µm
- Flat strainer 400 or 1000 µm
- Orifice without bore, 2 mm bore central or eccentric
- Code for DIN11864, clamp outside diameter or EN1092
Material and gasket
- 1.4435 (316L) with mesh 1.4404
- 1.4539
- 2.4602
- Gasket EPDM, VMQ (silicone), FKM or FFKM
Contact
Enquiry
Tell us the connection, pipe standard, nominal size, material and gasket, as well as the mesh width of the strainer or the bore of the orifice. We will propose the right version.
Prefer to write directly?