Vessel ferruleConical Opening
The ferrule widens conically towards the vessel. Wall thickness 4 to 6 mm, standard lengths 50 to 75 mm. Connection acc.
Vessel Ferrules
Vessel ferrules for sterile connections on the vessel, with conical opening or with reinforced wall thickness. Connection acc.
2shapes: conical opening, reinforced wall
5connection types acc. bio-plus®, DIN, DIN32676
DN04…200nominal size, up to DN200 acc. DIN32676
Ra < 0.6µm, product contact electropolished
Overview
The connection on the vessel. In two shapes.
- Conical opening or reinforced wall thickness
- Connection
bio-plus® orDIN11864-3 , female or male clamp ferrule - Connection acc. DIN32676
- Length to order
- Straight, with angle or with radius
- For gases and liquids
- Product contact 1.4435 BN2 (316L), special materials to order
- Product-contact surfaces electropolished, Ra < 0.6 µm or Ra < 0.4 µm
- Product-contact parts marked for traceability
Versions
Conical or cylindrical. Same connections.
Both shapes are available with the same five connection types:
Vessel ferruleReinforced Wall Thickness
Cylindrical ferrule with a thicker wall than the pipe, at the same inside diameter. Wall thickness 4 to 6 mm, standard lengths 40 to 75 mm. Connection acc.
Reinforced wall thickness
More wall. Same bore.
Dimensions of the ferrule with reinforced wall thickness acc. DIN32676, DIN series. The inside diameter matches the pipe acc. DIN11866 series A. Further series in the data sheet.
| Nominal size | Outside diametermm | Inside diametermm | Wall thicknessmm | Lengthmm |
|---|---|---|---|---|
| DIN04 | 12 | 4 | 4 | 40 |
| DIN06 | 14 | 6 | 4 | 40 |
| DIN08 | 16 | 8 | 4 | 40 |
| DIN10 | 18 | 10 | 4 | 40 |
| DIN15 | 24 | 16 | 4 | 50 |
| DIN20 | 28 | 20 | 4 | 50 |
| DIN25 | 34 | 26 | 4 | 50 |
| DIN32 | 40 | 32 | 4 | 50 |
| DIN40 | 47 | 38 | 4.5 | 50 |
| DIN50 | 60 | 50 | 5 | 60 |
| DIN65 | 76 | 66 | 5 | 60 |
| DIN80 | 91 | 81 | 5 | 60 |
| DIN100 | 112 | 100 | 6 | 75 |
| DIN125 | 137 | 125 | 6 | 75 |
| DIN150 | 162 | 150 | 6 | 75 |
| DIN200 | 212 | 200 | 6 | 75 |
Conical opening
Wide at the vessel. Slim at the connection.
Dimensions of the conical ferrule acc. DIN32676, ISO series. The outside diameter applies at the vessel. Further series in the data sheet.
| Nominal size | Outside diametermm | Inside diametermm | Wall thicknessmm | Lengthmm |
|---|---|---|---|---|
| ISO10 | 59 | 14 | 4 | 50 |
| ISO15 | 63 | 18.1 | 4 | 50 |
| ISO20 | 69 | 23.7 | 4 | 50 |
| ISO25 | 75 | 29.7 | 4 | 50 |
| ISO32 | 83 | 38.4 | 4 | 50 |
| ISO40 | 101 | 44.3 | 4 | 60 |
| ISO50 | 113 | 56.3 | 4 | 60 |
| ISO65 | 129 | 72.1 | 4 | 60 |
| ISO80 | 141 | 84.3 | 6 | 60 |
| ISO100 | 183 | 109.7 | 6 | 75 |
| ISO125 | 202 | 134.5 | 6 | 75 |
| ISO150 | 231 | 163.1 | 6 | 75 |
| ISO200 | 281 | 213.9 | 6 | 75 |
Technical data
Materials, surfaces, sizes.
- Sizes
bio-plus® - DIN04–DIN100, ISO06–ISO100, OD ¼"–OD 4"
- Sizes
DIN11864-3 - DIN10–DIN100, ISO08–ISO80, OD ½"–OD 4"
- Sizes DIN32676
- DIN04–DIN200, ISO06–ISO200, OD ¼"–OD 6"
- Pipe dimensions
- DIN11866 series A (DIN), series B (ISO), series C (OD)
- Shape
- Length to order; straight, with angle or with radius
- Product contact
- 1.4435 BN2 (316L)
- Special materials
- 1.4539, 2.4602, titanium and others on request
- Surface
- Product contact electropolished, Ra < 0.6 µm or Ra < 0.4 µm; others on request
- Media
- Gases and liquids
- Operating pressure
- To be checked by the customer in the vessel calculation
- Traceability
- Product-contact parts marked with article number, material and heat number
- Certificates
- EN10204 3.1 for product-contact parts
Ordering key
One key. Both shapes.
Ordering example: TCSK.I25.L050.G.35.C — conical ferrule acc. DIN32676, ISO25, length 50 mm, straight, 1.4435 BN2 (316L), Ra < 0.6 µm electropolished. The ferrule with reinforced wall thickness ends in V instead of K (e.g. TCSV).
Article
- BNKK / BNKV
bio-plus® female clamp ferrule - BBKK / BBKV
bio-plus® male clamp ferrule - ANKK / ANKV DIN11864 female clamp ferrule
- ABKK / ABKV DIN11864 male clamp ferrule
- TCSK / TCSV clamp ferrule DIN32676
- …K conical opening, …V reinforced wall thickness
Dimension and shape
- D DIN, I ISO, O OD
- Nominal size acc. table of pipe connections
- L000 length in mm
- G straight
- W00 angle in degrees
- R000 radius in mm
Material and surface
- 35 1.4435 BN2 (316L)
- 39 1.4539
- 22 2.4602
- C internal surface Ra < 0.6 µm, electropolished
- E internal surface Ra < 0.4 µm, electropolished
Contact
Enquiry
Tell us the ferrule shape, connection type, pipe standard and nominal size, length, straight or with angle or radius, material and surface. The permissible operating pressure is checked in your vessel calculation; we supply the dimensions for it.
Prefer to write directly?