ID 13–100 mm · −40 to 150 °CPTFE, fibre and wire
Stable construction, crinkle resistant.
Process Hoses and Fittings
Process hoses, hose assemblies and hygienic hose fittings for gases and liquids. For plants where cleanability, flexibility, traceability and material compatibility matter.
−70…+260°C, depending on hose type
1.6…102mm inner diameter, depending on type
DIN04–DIN100size range, also ISO and OD
Overview
The hose suits the medium. The fitting suits the line.
The range covers different hose materials, reinforcements, pressure and temperature ranges and connection standards. Pressure and temperature depend on the selected hose type.
- For gases and liquids
- Hoses in silicone, PTFE, EPDM and TPE
- With and without reinforcement
- Reusable or pressed fittings
- Connections to several hygienic standards
- Complete hose assemblies
- Electrically conductive versions for ATEX zone 0
- Product-contact materials marked with article number, material and LOT number
- Conformity FDA, USP Class VI, USDA, BGA XV, EU.Ph.3.1.9
PTFE
PTFE hoses. Chemically resistant, up to 260 °C.
For applications requiring chemical resistance and durability. Reinforced with fibre and wire or with stainless steel braid, optionally electrically conductive.
ID 13–100 mm · −40 to 150 °CPTFE, conductive, fibre and wire
Electrically conductive, ATEX zone 0.
ID 6.71–26.11 mm · −70 to 260 °CPTFE, stainless steel braid
Highest temperature range.
ID 6.71–26.1 mm · −70 to 200 °CPTFE, stainless steel braid, silicone cover
Protected outer layer, easy to clean.
ID 6.71–26.11 mm · −70 to 260 °CPTFE, stainless steel braid, for ATEX
ATEX zone 0.
ID 10.3–19.8 mm · −70 to 200 °CPTFE, conductive, silicone cover
Stainless steel braid under a silicone cover. Electrically conductive, ATEX zone 0.
Silicone
Silicone hoses. From small bores up to 102 mm.
With and without reinforcement for hygienic transfer lines. The reinforcement determines stability, kink resistance and temperature range.
ID 1.6–19.1 mm · −60 to 200 °CSilicone, non-reinforced
Without fibre reinforcement. Odourless and tasteless.
ID 2.95–25.4 mm · −60 to 135 °CSilicone, fibre reinforced
With fibre reinforcement. Odourless and tasteless.
ID 3.18–31.75 mm · −60 to 180 °CSilicone, fibre reinforced, crinkle resistant
With fibre reinforcement. Stable construction, crinkle resistant.
ID 5–55 mm · −40 to 140 °CSilicone, aramid reinforced
Aramid fibre reinforcement for stable, flexible use. Only with screw-in fitting.
ID 13–102 mm · −60 to 200 °CSilicone, fibre and wire
Reinforced with fibre and wire, flexible and crinkle resistant. Largest diameter range.
EPDM
For cleaning and steam.
ID 10–65 mm · −40 to 164 °CEPDM, for cleaning media
Reinforced with synthetic textiles.
ID 13–102 mm · −60 to 164 °CEPDM, for steam
Reinforced with nylon fabric.
Technical data
Hose, fitting, connection. Documented.
- Hose materials
- Silicone, PTFE, PFA, EPDM, TPE
- Reinforcement
- Textile, aramid, wire, stainless steel braid
- Media
- Gases and liquids
- Size range
- DIN04–DIN100, ISO06–ISO100, OD ¼"–OD 4"
- Connections
- Weld end, TC, DIN11864,
bio-plus® connections - Fittings
- Screwed hose fitting, reusable; crimped hose fitting, permanent; each with weld end DIN11866 or TC DIN32676
- Pressure and temperature
- Depending on hose type
- Product-contact conformity
- FDA conform, USP Class VI, USDA, BGA XV, EU.Ph.3.1.9
- Traceability
- Article number, material and LOT number on product-contact material
- Documentation
- Inspection certificate 3.1 for product-contact fittings, declaration of compliance 2.1 for hoses, hose assembly documentation, pressure test documentation, customer drawing with revision history, ATEX documentation where applicable
Assembly and service
From hose to assembly. And beyond.
Defining an assembly
- Hose type
- Inner diameter
- Fitting type
- Connection at both ends
- Hose nipple material
- Surface finish
- Assembly length
- Accessories and options
Accessories
- Key for the screwed hose fitting
- Heat protection sleeve
- Insulation tape
- Silicone insulating hose (VMQ)
- External heating with temperature controller
- Hose labelling
- Stainless steel hose support
- Stainless steel hose trolley
Service
- Installation and removal
- Assessment of the installation situation
- TAG numbering
- Pressure testing to technical specification
- Visual inspection and endoscopy
- Pre-cleaning and decontamination
- Drying, final cleaning and packaging
- Documentation and hose history
- Replacement hose lines
Contact
Enquiry
A hose assembly is defined by hose type, inner diameter, fitting, connection at both ends, hose nipple material, surface finish and length. Tell us the medium, pressure and temperature — we will propose a suitable build.
Prefer to write directly?